Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multiple phones to one ext 2

Status
Not open for further replies.

itech2004

IS-IT--Management
Jan 23, 2004
103
US
Just upgrade our Ip Office with Ip Phones, is there a way to assign multiple phones to one ext number?
 
No, every phone has it's own extension.
You could make a group and put in all those phones.
You could also log in on those phones ?



ACSS - SME (IP Office)
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
cover buttons, bridged appearances, internal twinning.

ACE IP Telephony
ACS IP Office
 
I'm trying to add a hunt group but I keep getting a conflict. I want to have ext 201, 202, 203 to ring together. When 201 is dialed, I created a hunt group and made it 201 and I added 202 and 203 to it. This is when I get a conflict 201 is conflicting because I have a user labeled 201 already.
Do I need to make a phantom ext and and 201 to that phantom group?
 
No just number the group something that isn't already an extension number, 200 if it's free or 300 or anything you like that doesnt clash, then just dial that number and/or point the incoming call route to it

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
What if I want the number to dialed is 201? These are all internal calls.
 
Then you need to change extn 201 to something else to free that number up, that's the only way I'm afraid, how would someone call 201 if they only wanted to speak to 201 and not the group if it worked the way you want it to....it just doen't make sense that way :)

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
itech2004,

The hunt group needs to be a seperate number like 300 or 400 something like that. Then add 201, 202, 203 etc into the hunt group.

 
Ok I made 201 the hunt group, now I have 202 and 203 ringing not 201.
How do i get all 3 to ring when 201 is dialed?

 
So what have you numbered the extn that was 201? You need to add that into the group :)

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
Thats it I needed to add that one to the group, I like to thank everyone for helping me with this.
 
No worries :)

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top