Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multiple phones on one DN

Status
Not open for further replies.

phuzzy42

IS-IT--Management
Nov 19, 2005
143
US
I've worked with Meridians for the last 3 years but I've just been handed 22 MICs 6.1 sites and need the answer to a basic question.

I have a site that needs 3 phones to have the same main and secondary DN's (I believe they're 7310's) - they're in stockrooms where the clerk wouldn't be able to hear the office phone ring. All 3 phones need to ring when a call comes in, and any of the 3 can pick it up (but not necessarily simultaneously).

Can it be done? If so, do I need to do anything other than put the two DN's on each of the phones? The sites are spread all over the state (no RADs) so I want to be prepared beforehand.
 
lets say you have extension 222, 223, and 224 in the stock room. ONLY tell people about extension 222, then put an ANSWER DN on extensions 223 and 224 to APPEAR AND RING for exntion 222.

Answer DN is in line Access.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top