I have a 2000 server with four NIC's in it (3 for subnets 1 for ADSL Internet router) it likes using the NIC connected to the ADSL router at startup but every so often decides not to use the right card for internet connections, requiring a restart. I have the gateway on all the cards set to the IP of the ADSL router is this the right way to do it or is there a more reliable way of configuring these cards/server
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Multiple NIC Internet Connection
- Thread starter PSLondon
- Start date
try using the "route" command so you can tell manually the 3 NICs (subnets) how to get to the router by using the other card (by entering the destination network, gateway, and everything manually) A+, MCP, CCNA
marbinpr@hotmail.com
Keep fighting for your knowledge!
marbinpr@hotmail.com
Keep fighting for your knowledge!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
