Multiple interface routing issue

[reinstalled]

Hi all,

This one has me scratching my head a bit as to whats the right to do.

I have a V490 server with the ce nic in it with two Ethernet ports. Port 0 is setup as 192.168.x.x with a 24 bit mask and port 1 has a 10.x.x.x with a 27 bit mask. I have Network traffic coming in interface 0, interface 1 is used for a SAN.
Traffic coming in from a remote location on interface 0 using a private range of 10.x.x.x/24 tries to go out interface 1 instead of interface 0 where it came in. I don't get it. The subnets are completely different, interface 1 doesn't even have a default router associated with it. Do I need to set up a routing table?

Any help is greatly appreciated.

Thanks

 

[dandan123]

Why would traffic on 10.x.x.x come IN on interface 0 ?

 

[coffeysm]

If it is connected to a SAN wouldn't you be using an HBA and not a network card? Could you provide an output of netstat -rn.