You can set up multiple ASA sessions to a single target system (e.g. 2 separate, simultaneous connections to Definity from ASA) by doing the following in ASA:
- Click on System and select the Definity system
- Click on System and Properties
- Click Add below the Connections box
- Assuming a LAN connection, enter IP address or
or server name along with port 5111.
- You can create many of these entries, use port
5111 for each
This is useful for keeping up a manual session while running reports & exports.
- Click on System and select the Definity system
- Click on System and Properties
- Click Add below the Connections box
- Assuming a LAN connection, enter IP address or
or server name along with port 5111.
- You can create many of these entries, use port
5111 for each
This is useful for keeping up a manual session while running reports & exports.