Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

multipath

Status
Not open for further replies.

ElHedi

Instructor
Mar 5, 2008
28
DE
we are using linux Redhat native multipath for persistent binding
and this is done using the wwid in the /etc/multipath.conf
I do not know how to do for tapes?
is it possible to have multipathing for tapes
is there any tool under networker to control this
special thanks
 
Tpo my knowledge multipathing for tapes is not possible.
With Networker there is an additional difficulty, the control port of the jukebox is not "dynamic" but a fixed property of the library.
If this controlport changes the library becomes unavailable, so there is not much benefit in multipathing.
Depending on your infrastructure you can attach the tapes in your library to different fabrics but the control port issue will remain.
 
Hi a060463xyz
thank you very much for your kind help
have you some docs or link about this difficulty :


With Networker there is an additional difficulty, the control port of the jukebox is not "dynamic" but a fixed property of the library


special thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top