I have a 6i report that includes a matrix that wraps to multiple pages (vertically, not horizontally). The problem is that even though the matrix covers about 8 pages, it is putting a blank page (heading but no data) between each one. I have taken page protect off the frame that includes the matrix, as well as changed the print on property to both Default, and All Pages. None of these seem to help. Does anyone have a reasonable suggestion how to prevent this? It is reports version 6.0.8.25.0 running on a 10.2.0.1.0 database.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Multipage matrix report including blank pages
- Thread starter papalpha
- Start date
Looks like the report spans 2 pages in height also, and the 2nd page is empty. Make sure the outer frame for the matrix has variable vertical elasticity. If doesn't help, try coloring backgrounds of different report frames (including matrix frames) in different colors to see which frame creates problem by spanning into second page.
It is also possible that some strayed and invisible layout element is stuck somewhere beneath the matrix. Inspect carefully Object Navigator and make sure there is nothing there outside the frame that includes the matrix.
It is also possible that some strayed and invisible layout element is stuck somewhere beneath the matrix. Inspect carefully Object Navigator and make sure there is nothing there outside the frame that includes the matrix.
- Status
Similar threads
