I have 2 iptv systems, site A that I can control anything, running off of one Cisco 3750, it has an iptv encoder multicasting a camera feed fine.
It has been given a fibre to another system, site B, that runs multiple iptv systems multicasting a load of video feeds and tv feeds.
site A has been changed to use the same IP subnet as B, and when plugged in clients on B can pickup A okay.
Site A is just Cisco, site B is Extreme. The Cisco runs IP Pim dense-mode on the vlan11, the extreme system is just a 4 switch flat tiered network, 2 core, 2 distribution switched
I want to be able to take the multicast at A, on port G1/0/1 and send it as a unicast to specific MAC addresses or IPs out G1/0/12, to the other system.
So that infact only certain clients can pickup the SAP and Stream, rather than all. If I could split them in to different Vlans i would, but I need some clients to pickup both multicast streams and others just their native one
Any suggestions would be great
Gurner
It has been given a fibre to another system, site B, that runs multiple iptv systems multicasting a load of video feeds and tv feeds.
site A has been changed to use the same IP subnet as B, and when plugged in clients on B can pickup A okay.
Site A is just Cisco, site B is Extreme. The Cisco runs IP Pim dense-mode on the vlan11, the extreme system is just a 4 switch flat tiered network, 2 core, 2 distribution switched
I want to be able to take the multicast at A, on port G1/0/1 and send it as a unicast to specific MAC addresses or IPs out G1/0/12, to the other system.
So that infact only certain clients can pickup the SAP and Stream, rather than all. If I could split them in to different Vlans i would, but I need some clients to pickup both multicast streams and others just their native one
Any suggestions would be great
Gurner