Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multi site Panasonic NS700s 1

Status
Not open for further replies.

Jonah29

Programmer
Oct 4, 2015
205
GB
Hi,
I have a client who wants an NS700 at two of their sites. The main will be about 40 x Users the smaller site will be about 12 x Users, which includes a couple of 2 wire cordless phones. What hardware and licensing is required to link them up so they can call and transfer calls between sites? Does this actually work properly. It’s been suggested that the easiest solution is I actually don’t have a system at the small site and just give them ip phones from the main site but the complication is the 2 wire cordless phones they use.
Thanks
Mark
 
I have a customer I done recently with 2x NS700's linked together
It was fairly easy to setup and haven't had any reliability issues
You just need IP Trunk Licenses and need to set the amount of these licenses used for the link between sites at each end.
I didn't get BLF keys working properly however, the don't show when a user a the other site is on the phone - I believe there is a license to allow this so may need to check with your reseller, our customer wasn't bothered by it and didn't want to spend extra cash


Calum M
ACSS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top