multi-port ATA FXS Device

[Mikel82]

Does anyone know of a good multi-port 2/4/6/8 ATA FXS device that will work on the IPO control unit or IPO server edition? Also, do you require a 3rd party endpoint device for each user/port?

Thanks

If your not going to it right don't bother doing it at all!

 

[IPOLackey]

Never needed a 4, 6 or 8 port ata but the Cisco SPA122's are quite good and easy to configure.

You need a 3rd Party IP endpoint for each user/line configured on the ATA.

 

[ipohead]

Grandstream do a range of devices but not all have an account (SIP profile) for each FXS port as they are really intended to connect multiple phones to a single trunk.

 

[biv343]

AudioCodes MP-112, 114 or 118 work also. You can use a third party IP endpoint for each port, or if you just need dialtone you can run a SIP trunk between the IPO and the MP. Just depends on what features the analog ports may or may not need.

 

[G van Hamburg]

AudioCodes indeed

Freelance Certified Avaya Aura Engineer

 

[rhuntertec]

The SPA112 and SPA122 are no longer made but Cisco has a newer version available.

I just put in a Grandstream GXW4216 and it works very well. It does use a 3rd party license for each port because each port is configured as it's own extension.

 

[Mikel82]

Thank You everyone for your replies.

If your not going to it right don't bother doing it at all!