Mulit device ring group with a cell phone

[alex053]

working on a job with MAS, UCC v2 licesnes, and MXe III version 6. Im trying to get my twinning to work.

I have my test phone set up that was built in the MAS with standard ucc license.
I have a multi device phone set at ext 1012
I have a multi device hot desk set at 1*012 with ehdu enabled and my dialing prefix and my cell phone number in it

I created my 1012 MDRG with 1012 and 1*012 as the members. its a standard group and not an external twin group. when I try to make an external twin group, I get a license error. I looked at another job that a different tech worked on and they were external twin groups.

everything on the phone functions fine but the twinning. what am I missing?

 

[kwbMitel]

Does the EDHU work when called directly, I assume no

Is it logged in? View the status via Maintenance command - Locate feature Ext 1*012

You do not need any other groups, the MDUG will function on its own.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[Billz66]

pretty sure UCC Standard MUST be MDU twinning group
We use single point provisioning on MAS to create the groups automatically and they work ok

If I never did anything I'd never done before , I'd never do anything.....