In pursuance of power breakdown, MSL5026 not functionning correctly.
COMPAQ
PL380G2 - UW SCSI3 dual channel
MSL5026 - 2 SDLT
The server is running well but the MSL5026 connected on port 1 of UW3 appeared disconnected (SDLTs apperaed connected). If i swap to channel 2 of UW3 Card, SDLTs appeared disconnected but MSL5026 appeared present and connected.
Impossible to backup data with Arcserve2000.
I've installed UW3 card on another server and connected MSL library. All peripherals (MSL and SDLTs) appeared connected. Backup is functionning for a few moment (less an hour) and stop wih an error in log viewer ('SCSI peripheral not responding in time...)
Using last versions of Bios card, CPQ SMARTSTART 5.4, W2k SP2, Arcserve2K sp3...
Any idea ?
COMPAQ
PL380G2 - UW SCSI3 dual channel
MSL5026 - 2 SDLT
The server is running well but the MSL5026 connected on port 1 of UW3 appeared disconnected (SDLTs apperaed connected). If i swap to channel 2 of UW3 Card, SDLTs appeared disconnected but MSL5026 appeared present and connected.
Impossible to backup data with Arcserve2000.
I've installed UW3 card on another server and connected MSL library. All peripherals (MSL and SDLTs) appeared connected. Backup is functionning for a few moment (less an hour) and stop wih an error in log viewer ('SCSI peripheral not responding in time...)
Using last versions of Bios card, CPQ SMARTSTART 5.4, W2k SP2, Arcserve2K sp3...
Any idea ?