Has anyone successfully installed MSL on to Dell R540 with PERC H750 Raid controller? We ordered new servers from Dell that shipped with new RAID controllers that are not on the Mitel compatibility list. Tired using RAID5, RAID1, RAID0. During the MSL install the server boots to the DVD and then right after selecting keyborad type, it Comes back and says " No Useable Disks found". I just installed MSL on to another DELL R540 with PERC H730 Raid controller and that went through no problem. Called Mitel Support and found that new RAID controller is not yet documented or tested. Called Dell and they told me MSL is not an OS that they test against. Dell suggested I configure server as EXSI and run as VMware. Just curios if anyone else has run into this yet.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MSL on DEll R540 Perc H750 Raid controller failing
- Thread starter Hawaii5O
- Start date
I agree install vmware with free license
- then you can do snapshots , deploy new version and restore from running ( allowing fallback)
- basic vmware config is pretty simple and offers much more flexibility
If I never did anything I'd never done before , I'd never do anything.....
- then you can do snapshots , deploy new version and restore from running ( allowing fallback)
- basic vmware config is pretty simple and offers much more flexibility
If I never did anything I'd never done before , I'd never do anything.....
- Thread starter
- #3
- Status