MSL 9.2.22.0/UC 4.0 - Alarm always Critical - Randomly locks up

[tomcotton]

I have just built a new UC server and installed it on MSL 9.2.22.0. It seemed to be running fine, allbeit a bit memory hungry.
Every few days it locks up, can ping but the power light is on, and I have to hard reset.

The alarm level is always showing as critical with the below message:

Current server congestion level 1, description CONG_YELLOW, DebugLevel: 1, BlockProvisioning: 0, BlockSIPRegistration: 0,PercentInboundDrops: 0, PercentOutboundDrops: 0, reason cpu

I press the clear alarm button and it does say Alarms cleared, but still has System alarm status: Critical.

Anyone got any ideas what I can try???

 

[tomcotton]

Sorry meant to say:

Every few days it locks up, can't ping but the power light is on, and I have to hard reset.

 

[danramirez]

did it happend with previous version of MSL? I am about to install MSL (new version) to be used as MBG.

What server are you using for installing MSL on? Memory and processor?

Regards,

Daniel

 

[tomcotton]

It's going onto new hardware, but no it didn't happen on the old version.

Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz
8Gb RAM

 

[tomcotton]

I've switched it over to a dl380 g4 and it's running ok now. Thanks anyway guys