MSI K7t266 pro 2u into Dell Case?

[johnbullas]

A mate of mine arrived on the doorstep with a complete Dell P3 PC with motherboard PSU, HDD, FDD and DVDROM wanting me to fit an MSI K7t266 pro 2u MB into the box (for some reason) ... after swapping the PSU for an ATX one, revelling in the "unclip and slide out" Dell MB technology, getting rid of the P3 fan assembly all was going well until the non-generic front bezel connector was encountered! Anyone have an idea as to the pinouts on the end of this......

http://www.flickr.com/photos/johnbullas/352053850/

Could take the case to bits and trace the pins but thought someone might know

Will ask Mike for the model number / service tag

I think finding a bare ATX case will be a sh*t load easier!!!!

Anyone want a DEll MB?



-

===================================
Transportation Research Consultant
Winchester UK

 

[Tuxedopenguin]

IIRC Dell uses foxconn cases, maybe you will find what you are looking for on foxconns website to assist you.

 

[wahnula]

I think finding a bare ATX case will be a sh*t load easier!!!!

Spoken like a true veteran. If the only part of the PC you are re-using is the case it had better well be a dang good one!