telcogoddess
Technical User
Wondering if any one has used a MPLS circuit on the BCM. How was it configured (through cisco router?) or why it won't work. Please help!
Thanks!
Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MPLS and BCM 1
- Thread starter telcogoddess
- Start date
- Status
-
1
- #2
Shouldn't be an issue. If using the internal WAN card, the encapsulation type would be frame relay, you would configure your WAN address on the WAN card (make sure you specify the appropriate number of channels), then configure a static route to route all unknown subnet traffic to the MPLS network.
- Status
Similar threads
- Question