Moving Option 11 Meridian Mail from one system to another

[srcvh1]

Hello all,

It has been too long since I've dealt with MM so I'm reaching out to the experts here. Here is my situation.

I have two Option 11 Rls 25.08 systems. They are linked via point to point PRI for Meridian Mail purposes. The customer has deployed Cisco at the Mer Mail site. The only thing that is live at this site now is the P TO P and Mer Mail. Is there a way that I can move the Mer Mail to the other site and just program the PBX for this new Mer Mail? From what I remember this can not be done because the dongle on the SSC card has to match the Mer Mail. Is this correct?

Thank you ahead of time

 

[Firebird Scrambler]

Meridian Mail for the Option 11 based systems needed to be paired up to the site ID as you have guessed. You mentioned that both systems are at V25.08. Can you print off the SLT from both systems to check if the licenses are compatible?.

It might be that the database from the existing system will be able to be used on the system that has just the mail working.

It would still require anything in slot 10 to be moved to a spare position and for the Meridian Mail data in LD 23 and the AML/ADAN/Agent DN's to be reconfigured.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[KCFLHRC]

You are 100% correct, the Mer Mail keycode is tied the the PBX TID, so no, it wont work. It will fail on the installation at the Fox Security Check.

 

[StanleySteamer]

You might be able to at least move the MerMail system to the same location and link them via PRI in the same room.