Moving a printer - how easy?

[Terryiom]

We are currently installing a new workflow to replace the old Dos Foxpro program, but are having a few issues as we need to run both for a while.

There are 5 machines which print over a Novell Network to this Oki 321 printer attached to the LPT port of one machine. The dongle the new software uses causes a conflict when we try to print from Foxpro through the dongle, so we need to moce the printer to another workstation.

I don`t know anything about Foxpro (hence why I am here asking you guys), do we need to alter the coding to set the path to another machine, so when the other print to it, the print goes through the correct machine?

How can I call up a copy of the code to view.

Thanks in advance.

 

[AnanthaP]

(1)
Check the capture status of the 5 work stations. If the LPT is "capture"d, then it can be changed in Novell.

(2) Otherwise, out of luck. Executables createsd in FoxPro can't be viewed.

End