a tech who visited one of my remote sites inadvertently programmed some members from one route into another. I need to put these members back in their original route but cannot figure out from the NTP how to do it. I just need a push in the right direction...thanks very much.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
move members from one route to another
- Thread starter coniglio
- Start date
ld 14
out xx xx=nunber of trunks to move
she'll ask the starting tn,
there gone.. no "are you sure prompt
new xx
type y
tn =starting tn
rtmb route member, do a ltm in 21 to decide what member you want these to be..
y equals the same as other members of the route
john poole
bellsouth business
columbia,sc
out xx xx=nunber of trunks to move
she'll ask the starting tn,
there gone.. no "are you sure prompt
new xx
type y
tn =starting tn
rtmb route member, do a ltm in 21 to decide what member you want these to be..
y equals the same as other members of the route
john poole
bellsouth business
columbia,sc
- Thread starter
- #3
acewarlock
Technical User
LD 14
REQ CHG
TYPE (ENTER THE TYPE OF TRUNK)
TN (XX X XX XX)
RTMB (NEW RT NUMBER AND MEMBER)
<
REQ CHG
TYPE (ENTER THE TYPE OF TRUNK)
TN (XX X XX XX)
RTMB (NEW RT NUMBER AND MEMBER)
<
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question