I don't know it this is possible with what i currently have so here it goes. I am testing a Lacie 7.5T drive array and have mounted it as a share off a server that currently has the Commvault agent installed on it. I can't backup a mounted share using the Windows Idata Agent so Is there other products available that I need to do this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mounted Share using Commvault
- Thread starter mrfokker
- Start date
By default only volumes that are local to the client will be backed up if your subclient content is "/". So mapped drives and shares are not local, neither are cluster resources except to a virtual client installed into the cluster group.
As Psy053 says you will need to explicitly define the Lacie array as a UNC path or a drive letter in you subclient content to back it up. All the other vendors that I am aware of are consistant with regards to this.
---------------------------------------
EMCTA & EMCIE - Backup & Recovery
Legato & Commvault Certified Specialist
MCSE
As Psy053 says you will need to explicitly define the Lacie array as a UNC path or a drive letter in you subclient content to back it up. All the other vendors that I am aware of are consistant with regards to this.
---------------------------------------
EMCTA & EMCIE - Backup & Recovery
Legato & Commvault Certified Specialist
MCSE
- Status
Similar threads
