Guest_imported
New member
- Jan 1, 1970
- 0
- 0
- 0
What are the command line and step to mount a Hewlett Packard Surestore T20.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
mount
- Thread starter Guest_imported
- Start date
- Status
what flavor of *nix are you using?
the mount command is used to "mount" local/remote file systems for use. since tape drives are basicaly recording devices, they do not actually contain a file system you can use, so they cannot be mounted. assuming that your kernel supports the device, a device file should be set up automatically for you once *nix detects it (ie. boot-up), on most linux boxes the first tape drive will show up as /dev/rmt0 (for r_emovable m_edia t_ape number=0) but different *nix's will have other conventions.
the standard *nix backup is done with tar (t_ape ar_chive), in the format:
"tar -cv yourdirectoryhere"
without the -f option we normally use, _on some systems_ tar will assume you want to write to the first tape device.
*these are very sketchy instructions without knowing exactly which *nix you are using!
hope this helps!
the mount command is used to "mount" local/remote file systems for use. since tape drives are basicaly recording devices, they do not actually contain a file system you can use, so they cannot be mounted. assuming that your kernel supports the device, a device file should be set up automatically for you once *nix detects it (ie. boot-up), on most linux boxes the first tape drive will show up as /dev/rmt0 (for r_emovable m_edia t_ape number=0) but different *nix's will have other conventions.
the standard *nix backup is done with tar (t_ape ar_chive), in the format:
"tar -cv yourdirectoryhere"
without the -f option we normally use, _on some systems_ tar will assume you want to write to the first tape device.
*these are very sketchy instructions without knowing exactly which *nix you are using!
hope this helps!
- Status
Similar threads
- Locked
- Question