More then one ringing line? 1

[t2theroy]

Can someone point me in the right direction, I'd like to set up something so when I receive an incoming call more then one phone rings.
I'm reusing a system and I can see that there is something that I'd like already set up, just rings on the wrong DN's
When I dial DN 4225 6 lines ring. How do I edit the TN's or create my own "group of ringing phones" what LD or where should I start?


REQ: prt

TYPE: dnb

CUST 0

DN 4225

DATE

PAGE

DES


DN 4225
TYPE SL1
TN 004 0 00 13 KEY 00 MARP DES COSATL 26 APR 2010
(3903)
TN 004 0 00 14 KEY 01 DES COSATL 26 APR 2010
(3903)
TN 005 0 00 11 KEY 01 DES SUNSEL 23 APR 2010
(3903)
TN 005 0 00 02 KEY 01 DES COSATL 7 SEP 2007
(3903)
TN 003 0 00 10 KEY 01 DES COSATL 7 SEP 2007
(3903)
TN 004 0 00 03 KEY 01 DES COSATL 7 SEP 2007
(3903)

here is a prt with the one that has MARP beside it
REQ: prt

TYPE: tnb

TN 4 13

DATE

PAGE

DES


DES COSATL
TN 004 0 00 13
TYPE 3903
CDEN 8D
CUST 0
FDN 7000
TGAR 0
LDN NO
NCOS 7
SGRP 0
RNPG 2
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTD TDD HFA GRLD CRPD STSD
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDA CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD OCBD FLXD FTTC MCBN
CPND_LANG ENG
RCO 0
HUNT 7000
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 MCR 4225 7 MARP
01 SCR 4221 7 MARP
CPND
NAME Cossette Atlantic
XPLN 27
DISPLAY_FMT FIRST,LAST
02 ADL 16
03 ADL 16 4231
04
05
06
07
08
09
10
11
12
13
14
15
16 MWK 7000
17 TRN
18 AO6
19 CFW 16 99024211500
20 RGA
21 PRK
22 RNP
23 SCC 0023
24 PRS
25 CHG
26 CPN
27 CLT
28 RLT
29
30
31

Thanks
t2theroy

 

[bigindian65]

the other TNs, where it also appears, if you did not want them to ring all six lines, you would nul key 1 of those 5 sets, removing the appearence of 4225 anyway, to look like the one above, you would do a chg on the tn you want it be on and add it ie

ld 11
chg
type
cust 0
tn
easy - yes
key 1 scr xxxx enter out

Mato' Was'aka

 

[Tman45]

You build your extensions using MCR instead of SCR. As you see 4225 is a MCR built on key 0.

So, for your 'other' extensions and 'other' ringing group you just select an extension that would appear on all the phones in the group (example 4230 would be your MCR) and your first phone extension would be 4231 built as a SCR. Then your 2nd phone would have key 0 as MCR 4230 and your key 1 would be SCR 4232. Does that make sense? 4230 ends up being your "group of ringing phones"

Hope that helps!

 

[bigindian65]

i didnt even see the mcr...to old i guess.... *

Mato' Was'aka

 

[Tman45]

BigIndian - you STILL ROCK Mato'

We youngins (30s) still chalk up our mistakes to being "too early" in the morning to pay attention to detail

Take care man! Thanks for the star!

--Tyson