More than 5 fibre remotes

[dnc16]

Does anyone have or work on a system with more than 5 fibre remotes and does the system monitor work across all remotes?
According to Nortel docs, release 3 supports remote system monitors and release 4 supports 5 remote system monitors.
Now what options or work arounds are there for more than 5 remotes?
Current situation - Option 81 with 7 fibre remotes.

 

[unkalary]

What do you mean "Release 3/Release 4". Surly not the software release of the PBX 81C. I have a 81C with 7 fiber remotes running release 21 software and do not have any tbl with them. System monitor should be ok if you have them optioned correctly

 

[dnc16]

Release 3 and 4 is referring to the fibre cards. The system monitor is being daisy chained through them. Nortel says that the cards can only support 5 remotes in a daisy chain. The 81 is running rls 25. So how are you handling the 7 remotes?

 

[dnc16]

.