Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Monthly Chart 2

Status
Not open for further replies.

rhurd

Programmer
Dec 15, 2002
22
US
I have a Monthly chart that showed each month for 12 months.
I made some changes to the chart and made it longer also. Now at the bottom of the chart it shows every other month. I want ever month ? It use to show every month.

regards
Richard Hurd

Running CR9 Database is Visual Fox Pro 5
Using ODBC.
Richard E. Hurd 781-581-0594 Off.
rhurd@gpro2000.com Tec-User Not programmer
 
Try right clicking on the chart->chart analyzer->format chart->grid->group axis tab->labels->use manual number of groups between labels. This might be checked already, so then you should uncheck it and see if you get a label for each monthly group. Otherwise, if it is not checked, you could check it and set the number of groups between labels to 1.

-LB
 
There's a Stagger Labels property in there also that you should make sure isn't checked.

-dave
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top