Monitoring Utilization on Meridian Opt 11c

[jetb]

Hi Everyone,

Please suggest a simple tool to monitor the utilization of a T1 line in Meridian. Would also like to know if the utilization numbers are available as an SNMP id.

Thanks.

 

[rhack5565]

You need to enable traffic reporting. You will need to enable Customer Report 2 (TFC002). It will give counts on number of inbound/outbound, CCS, All trunks Busy etc. It's pretty archaic, but unless you want to spend money on a commercially available package its all you can do. Look at the Software Features Guide, Traffic Reporting for details.

There is not an SNMP id available.

 

[jetb]

I believe those utilization numbers can only be retrieved through a TTY session. I was hoping that I could extract those numbers through the ethernet interface, through SNMP.

Thanks.

 

[janaya]

If you can, let me know. I have a spreadsheet that you can dump the traffic info into and it comes out looking like the nice and pretty spreadsheets you pay for.

I just need to get the script that will automatically pull the info from the pbx and I'm set for auto traffic study all the time.