Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Monitoring Individual SIP Trunk

Status
Not open for further replies.
rgrignon

rgrignon

MIS
Feb 18, 2005
9
0
0
US
We are considering implementing SIP throughout our infrastructure and SIP is charged per concurrent call path. I want to make sure I don’t over allocate at one site, so If I can find a way to see snapshots of how many lines are in use, (per trunk not per call manager) I could scale the SIP trunk accordingly.

I loaded RTM Tool and that seems to be a high (enterprise) level. We have about 30 sites and I need a way or a command to see lines in use on a specific VG...

This was very easy on a Nortel Switch so I would assume its just a matter of finding the right command or even a MIB

Thanks for any assistance.
 
Status
Not open for further replies.

Similar threads

Diya Freahat
  • Locked
  • Question
called name between avaya I P office & CUCM via SIP trunk
Replies
1
Views
80
Diya Freahat
Diya Freahat
Gnjiro
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
0
Views
86
Gnjiro
Gnjiro
Geordie12567
  • Locked
  • Question
Maximum concurrent calls on a SIP trunk with CUCM and Cube
Replies
2
Views
151
biglebowski
biglebowski
DTGMI
  • Locked
  • Question
Nortel to Cisco VG310 & 4431 SIP GWs
Replies
0
Views
43
DTGMI
DTGMI
Qzwsa
  • Locked
  • Question
Inband DTMF to SIP device for zone paging
Replies
1
Views
74
LoPath
LoPath

Part and Inventory Search

Sponsor

Back
Top