Monitoring CPU utilization of PP 8600 using MRTG

[leomavv]

Hi

how to monitor CPU utilization of PP 8600 using MRTG. I think we need to have mib value for it if yes what is the mib value ?..It will be a great help if someone can help me out.


Mavvy

 

[gillymonst]

The OID your looking for is 1.3.6.1.4.1.2272.1.1.20.0

 

[anthonyanderberg]

Here are the things I'm graphing, remember to use the 'gauge' option for these graphs.

CPU Utilization
.1.3.6.1.4.1.2272.1.1.20.0

Temperature
.1.3.6.1.4.1.2272.1.100.1.2.0

DRAM Utilization
.1.3.6.1.4.1.2272.1.1.47.0

I'm also graphing these items, but must not be pushing things hard enough to get the average load above 0%.

Switch Fabric Utilization
.1.3.6.1.4.1.2272.1.1.21.0

Buffer Utilization
.1.3.6.1.4.1.2272.1.1.13.0

 

[leomavv]

Thank you

That is great!!

Is there anything for MLT SMLT also??

Mav

 

[niklasw]

Hey you guys

Im getting an error message when I try to run that OID for CPU utilization, I wonder if I have the "wrong" version of MRTG or something...
It says that it is an unregistered value in the MRTG_lib.pm file, and I guess that means that it cannot use that OID? Anyone???

-Cheers, Niklas

 

[telecom116]

Here's the target line from my MRTG 8600 CPU % monitor:

Target[g8600-cpu]:1.3.6.1.4.1.2272.1.1.20.0&1.3.6.1.4.1.2272.1.1.20.0:abcdefgh@10.1.2.3

FYI, here's an 8600 chassis temperature monitor OID:

Target[g8600-tempc]: 1.3.6.1.4.1.2272.1.100.1.2.0&1.3.6.1.4.1.2272.1.100.1.2.0:abcdefgh@10.1.2.3

 

[wanyph]

Hi,

I use PRTG (

http://www.paessler.com)

for monitoring.
It´s better as MRTG and not very expensive.


mewi