Monitor 1

[gshaheen]

Can anyone out there tell me how to use the monitor feature on the Magix/Legend to view what DNIS digits a carrier is sending to me on a T-1 or PRI?

Thanks!

 

[NewNic]

kristina is the password. will take you to a dos prompt.

"trace prigon x" x = bchannel grp
this will give you the real time layer 3 dumps. Look for a 70 in the set up msg. This is the begining of the number dialed. example:
700B A233 3031 3932 3437 3531 3701

This is saying that it is 12 octets long, I always start at the end, throw out the "3"s and that is you number.

This example was ab out bound call dialing 301-924-7517.
On an inbound call you would look at the same way.

If you want to see the ANI look for a 6C it will be in the same format.

to turn off. "trace prigoff X"

 

[jinxs]

I found this on Layer 3 coding, it's for AT+T, yet, I'm assuming it's based upon standards. Alot of info on Layer 3 coding. You just need to change it from Binary to Hex.

http://www.att.com/cpetesting/pdf/tr41459_99.pdf

 

[pbhughes]

How can I monitor pots lines that the system services? I have some old pots line that were kept around because they were published on sales documents. I need to see what digits show up at the switch. Thanks in advance.