Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
monitor acerview 7156s not supporting vga signal. please help?
- Thread starter steven10
- Start date
- Thread starter
- #3
here is the complete history:
the monitor was intermittently faulty, i.e it used to works then at times no display. when i restart my pc the image is back (not always), after further investigation i've noticed the card was also faulty. I've got it replaced-it was a Rage II AGP card. However i tested the monitor with another pc with a different card, at first it was ok but not for long. Actually when i power it on nothing is suspected i can see the led flash indicating no signal. But as soon as i connect the vga cable the led turns green but display is available. I took voltage readings before & after connection of the cable and noticed that the EHT section is switched off as during normal stand-by mode.
the monitor was intermittently faulty, i.e it used to works then at times no display. when i restart my pc the image is back (not always), after further investigation i've noticed the card was also faulty. I've got it replaced-it was a Rage II AGP card. However i tested the monitor with another pc with a different card, at first it was ok but not for long. Actually when i power it on nothing is suspected i can see the led flash indicating no signal. But as soon as i connect the vga cable the led turns green but display is available. I took voltage readings before & after connection of the cable and noticed that the EHT section is switched off as during normal stand-by mode.
- Status
Similar threads
- Locked
- Question