JohnnyThunder
Vendor
I have a client with a CICS. When connecting a clean music source it sounds terrible as background music and MOH. I must have a bad port or is there something that could fix this? Thanks for any and all help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MOH sounds terrible
- Thread starter JohnnyThunder
- Start date
- Status
RikRodgers
Vendor
Or a connectivity issue.
If you're using a headset jack, for instance, the cords commonly made for those (1/8" stereo type) are usually string inside, with copper painted on. Replace it with a decent cord, and the trouble should clear up.
If you're using a headset jack, for instance, the cords commonly made for those (1/8" stereo type) are usually string inside, with copper painted on. Replace it with a decent cord, and the trouble should clear up.
curlycord
Programmer
Check wiring and that tech did not splice with b connects (bed of nails) or punch down stranulated headset cord to BIX or 66.
Suggest use cross connect and solder to mini jack.
Use a proper resistor according to the specs in the manual, if you dont this can cause the port to do this or blow completely.
=----(((((((((()----=
curlycord
Suggest use cross connect and solder to mini jack.
Use a proper resistor according to the specs in the manual, if you dont this can cause the port to do this or blow completely.
=----(((((((((()----=
curlycord
- Status
Similar threads