Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modular Messaging 2

Status
Not open for further replies.

rm1967

Technical User
Jan 5, 2006
12
CA
Does anyone have a diagram linking all the components necessary to implement an MM (with MSS) to an S8720/G650 using QSIG T1 Integration?
 
I don't have have the 3com hub, but I think I have everything else. I can't definitely get a hub though. I am ACA certified, but that was back in March of this year and this is my first crack at it. No pressure... Before I go after s/w loading I wanted make sure I had all my cable connections correct first. Then, I have to make sure I get the rest of the install procedures. Thanks... RM...
 
If you just have 1 MAS then you don't need a hub. Just use a crossover LAN cable from the MAS to MSS private LAN connectors.

Chuck

RCT Technologies
 
Yes, only 1 MSS and 1 MAS. Thanks...
 
You will find the DCT tool makes the install go much better i think. But if you have not used it you should read up on it and FILL OUT THE PLAN FORMS BEFORE YOU DO ANYTHING! As well as the DCT file

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
I think I will just go through the install docs thoroughly and get this 1st install out of the way... Thanks... RM...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top