Modular Messaging Sub Type

[wallot]

Does any one have a reference to using site admin to import in to MM? I'm getting "atribute subtype is required". I exported some existing subscibers but that field is blank.

Thanks
Richard

 

[kepetersen]

First question is what type of MM are you connecting to? If it is an MSS backend, you can use the attached document to assist you. You must create a trusted server on the MSS to point to the IP address where ASA will be used.

 

[wallot]

Thank you, yes, the system is MM single server with MSS. I had established the connection OK, I kept failing the import because of the subtype field. I found a reference (sort of) and figured out the entry - u for unassigned. After that the import was successful.

Thanks again,
Richard

 

[wallot]

BTW, your doc was the same as I'd figured out. FYI - good for MM 5.2 and site admin 6.0 as well.

Thanks again,
Richard