Modify outgoing Number in SIP trunk

[arunknair]

I have configured a 30 channel sip trunk for one of my customer, but when i try to make outgoing call systems call rejeted and we figuresd out that this issue from telco. Incoming is working fine

I have set the SIP tab used users with the sip live numbers ,

When i make a call the IPO is send 01234567@172.34.34.86 and the sip trunk is droping the call, the telco told me to send the number in this format 01234567@90003344 , where 90003344 is the Unified number for the 30 DID/DOD lines

Hw can i modify this, i have a SIP line 17 and under it for outgoing i have line 18, i say a few parametes under this, which one should i set to change the number send by the system to telco.

 

[amriddle01]

That's bollocks, get a better provider, I have never seen this requirement before



"No problem monkey socks

 

[Bas1234]

Haha, indeed...get rid of them.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[tlpeter]

I also never seen this and it is totally not by the SIP standard at all.
You need to send an URI which is nothing more then number@ipaddress


BAZINGA!

I'm not insane, my mother had me tested!