Modify a CDN

[tataylor]

While trying to learn and understand my Succession 1000 better I inadvertantly outed one of my main CDNs. Just goes to show that you should never type commands that you do not fully understand. Anyways, after I figured out what I had done to completely take down all of my voicemail functionality I had problems getting the CDN reentered the way I needed. This is the way it looks now and is correct.

TYPE CDN
CUST 0
CDN 5000
FRRT
SRRT
FROA NO
MURT
DFDN 4900
CEIL 2047
OVFL NO
TDNS NO
AACQ YES
ASID 16
SFNB 16 17 18 19
USFB
CALB 0 1 2 3 4 5 6 7 8 9 10 11 12
CNTL YES
VSID
HSID
CWTH 1
BYTH 0
OVTH 2047

When I created it from scratch using new I ended up with something like this:

TYPE CDN
CUST 0
CDN 5000
FRRT
SRRT
FROA NO
MURT
DFDN 4900
CEIL 2047
OVFL NO
TDNS NO
AACQ NO
CNTL YES
VSID
HSID
CWTH 1
BYTH 0
OVTH 2047

How do you get the AACQ to yes? If you change the AACQ to yes does that automatically add the following lines?

SFNB 16 17 18 19
USFB
CALB 0 1 2 3 4 5 6 7 8 9 10 11 12

If not, how do these lines get into the configuration for the CDN?

 

[mluckie1]

These BIT patterns are assigned when the CDN is aquired by Callpilot or Symposium. CNTL will then change to yes.

 

[johnpoole]

and VSID, that's a memory test so look the vas id up


john poole
bellsouth business
columbia,sc

 

[robust57]

I have the same question but wasn't able to get anywhere with the above help. I guess my bigger question is how do you get the CDN to be aquired by Callpilot. I don't even get the AACQ prompt.


ADAN ELAN 16
CTYP ELAN
DES CALLPILOT
N1 512


VAS
VSID 09
DLOP
VSID 16
DLOP
ELAN 16
SECU NO
INTL 0001
MCNT 9999


SERVER TASK: ENABLED
ELAN #: 16 DES: CALLPILOT
APPL_IP_ID: 192 .168 .1 .11 LYR7: ACTIVE EMPTY APPL ACTIVE

 

[johnpoole]

CNTL yes
VSID 09

john poole
bellsouth business
columbia,sc

 

[janchundia]

You need to restart the Call Pilot System. In the boot ptroceess the Call Pilot adquire the CDN again

Regards

Javier