Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Modem suppirt for partner Messaging
- Thread starter dciscott
- Start date
From on site, plug your modem into a Partner port that has been programmed for auto line selection to Intercom. Have your communication software dial 777 two or three commas then **3.
From offsite, set your software to dial a line that is answered by auto attendant, add enough commas for auto attendant to answer put in *7 two or three commas then **3.
If no lines are answered by auto attendant call the site from your modem phone, have them transfer you to 777, set your software to dial **3.
After you connect with any of these 3 press enter at the login prompt put in sysmgr and the password you setup for accessing admin through 0#.
From offsite, set your software to dial a line that is answered by auto attendant, add enough commas for auto attendant to answer put in *7 two or three commas then **3.
If no lines are answered by auto attendant call the site from your modem phone, have them transfer you to 777, set your software to dial **3.
After you connect with any of these 3 press enter at the login prompt put in sysmgr and the password you setup for accessing admin through 0#.
- Status
Similar threads
- Locked
- Question
- Locked
- Question