Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

modem init strings

Status
Not open for further replies.

imutt

IS-IT--Management
May 28, 2002
1
US
What is the initilization string for modems in SCO?
 
See /usr/lib/uucp/Dialers and page down to the dialer specified in /usr/lib/uucp/Devices.
You'll find two lines, one for initialization and one issued on hangup. Ed Fair
unixstuff@juno.com
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
 
#cu -lttya1 dir (a1 if your modem is on this port or whatever)

You then get a message saying "connect"

The initialisation string is:

#atdt 9999999# or whatever the number you are dialling is...

Hope this helps

Andy
++
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top