Modem hangs and needs power cycled, question?

[WideTrac]

I have a site that we must power cycle the modem to connect remotely. We have replaced the modem severale times. It is on a Octel Aria system. I am trying to find something that can be used to power cycle the modem remotely.
Does anyone have any ideas?

Thanks

 

[KenMeans]

How are you setting up the modem? are you using the string in the install book?

You could put a timer on the power like i use on my Christmas lights to turn off at 1 am and back on at 1:05 am but you should not have to do this.

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[WideTrac]

We are programming the modem per Octels configuration. This site just has trouble all the time with the US Robotic modems. I found a unit to power cycle the modem but your way would be cheaper. We are going to replace the modem one more time and see what happens. Thanks for your reply.