Modem connection through RRAS not routing outside of RAS server

[kooma]

There is a closed post: thread931-1300689

nauliv (TechnicalUser) 10 Nov 06 22:34
Hello All,


We've been looking at the following for many hours, and can't seem to find the root cause....

Remote PCs using XP-pro can dial-up to our RRAS server, get an IP, but can only communicate with the RRAS server, and not go out on the LAN card of the RRAS server.

Here is the configuration


* Windows 2003 R2
* 1 ethernet connection connected to 64.10.20.45/24
* 1 modem for RAS

* Routing and remote access service
* Enable computer as : Router + Remote access server
* IP: enable IP routing + Allow IP-based RAS connections

When dialing in, the remote computer gets a RRAS-assigned IP (such as 192.254.69.12), but can only see the LAN IP of the server: 64.10.20.45. No other machine in the subnet 64.10.20.0/24 can be contacted.

Sounds like an IP routing issue, but everything has been turned on in RRAS (see above). Enabling/Disabling "Use default gateway on remote network" doesn't make any difference (which it shouldn't, considering the remote computer are not on any local network).

Have we overlooked somewhere ?.... <grin!>


Thanks all.



Does anyone know how to fix this please?