Modem connection - no reply

[HIREI]

Hi all!
BC9 CNI76, modem BYB2424 in MAG0.

History:
1. Access through modem was right, worked.
2. After failure MAG was changed from LBP17 to LBP20.
3. Access through modem is not right, not worked at all.

STUNI/STTSI/STRAP gives NO SIGNALS FOUND .

Program units TWP2, ICM were restarted, station was restarted - no results. What to do else?

WinFIOL channel properties - Protocol - Modem (telephony), Mode - Buffered, 8-N-1.

 

[whosrdaddy]

in what slot did you put the modem?

--------------------------------------
What You See Is What You Get

 

[HIREI]

Thanks, Daddy.

1-0-50 BYB2424 , also:
1-0-40 TLU75
1-0-42 HDU7
1-0-60 IPU
1-0-60-01 SYSTERMINAL
1-0-60-02 SYSTERMINAL2
1-0-60-03 MODEM1
1-0-63 LPU5 now (was in 1-0-70, in 1-0-63 was ALU2, service firm moved ALU2 to MAG1, and LPU5 from 1-0-70 to 1-0-63, so now we have "2 ALU" - one real and one ficticious, in pos 1-0-63).

NO ANSWER FROM ALU-BOARD IN LIM 1 we have now after ALREI.

 

[HIREI]

So, is 1-0-50 right position for modem or not?

 

[whosrdaddy]

1-0-50 is ok!

I think that the modem needs to be reprogrammed. since you replaced the mag, modem had no power and chances are big that the backup battery on the modem is no longer working....

--------------------------------------
What You See Is What You Get

 

[HIREI]

Thank you!!! Very reasonable.