Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Modem Card
- Thread starter Vmail
- Start date
The modem card fits internaly ino the main system module
It enables external useres to create a dialup networking connection through the IPO
this connection can be used to obtain the config.
If you have an ISDN connection at HQ then a ISDN terminal adapter can be used to connect to the IPO & the modem card is not req.
It enables external useres to create a dialup networking connection through the IPO
this connection can be used to obtain the config.
If you have an ISDN connection at HQ then a ISDN terminal adapter can be used to connect to the IPO & the modem card is not req.
- Thread starter
- #3
Typically your modem call arrives on some known CLI/DID/whatever for which an Incoming Call Route is set to RAS service as its destination.
RAS username/password handshake occurs and then the connection is assigned an IP address by the IP Office (by default).
That connection is then the same as a PC on the same LAN as the IP Office, ie. run Manager, the only change is that you may have to change the Manager preferences from 255.255.255.255 to the specific address of the IP Office LAN1.
RAS username/password handshake occurs and then the connection is assigned an IP address by the IP Office (by default).
That connection is then the same as a PC on the same LAN as the IP Office, ie. run Manager, the only change is that you may have to change the Manager preferences from 255.255.255.255 to the specific address of the IP Office LAN1.
- Status