Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mobile Extension Client

Status
Not open for further replies.

BillB66

Technical User
Apr 24, 2008
63
AU
3300 Cxi Running 9 UR2 PR2 ( 9.0.2_31)
APC installed as Teleworker and Mobile Extension
Mitel 6000 Mas Version is 7.0.2.11
Mobile Extension Installation version is 1.1.28
Mobile extension is installed and tested and operational.
We have purchased some client licenses so that we can
load the client software on a Nokia E61i and a HTC touch Pro for Demo's.
What I cant work out is how to configure the Server to distribute the client software . The documentation for
ME makes reference to MAS ver 8.5 and ME version 7.1.
I suppose this means I have to upgrade the MAS version on the APC card ?
Is there a list of supported USB cd drives ?
I dont suppose a USB flash drive could be made to work ?

 
Hi Bill,
I think the ME client came out with ME 1.6 so yes an upgrade is required.
Looking at the docs, they just say to use a usb cd drive!
No mention anywhere of what type so I say try it...
Not sure about a flash. You could try it with either being formatted in either fat32 or NTFS with an ISO image???
Worth a shot.

Dave

You can't believe anything you read... unless of course it's this.
 
ME has to be at least Release 1.6 to support the clients listed. You need the ME server exposed to the internet for the clients to be able to download the client. Basically when everyting is set up you click a provision buttong and the ME server sends a message to your phone with a link to download the client. One thing, you need a DNS entry according to the docs for the ME server but I have it working by using the IP address of the server. Also we are using R1.7 where office link is available. That is a nice additon to the client.

 
Have ICP3300 and Mobile extention, when ME is turned on and desktop rings, it takes 3 rings before cell phone rings. Is there away to cut the timer down to 2 rings?
 
gigmister - start your own thread.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top