Hi,
I have a small problem with Mobil Extension. I have a number of users up and running using R1 for authentication. This works just fine.
Today I initiated a R2 number, but allways get a message stating "unused number" from public network. If I do a trace on SLP60 the calls to the R2 number is disconnected with cause Unasigned (unallocated number).
All incomming traffic to my MD110 is routed in transit through a Nortel Meridian PBX. The numtype for calling party is National Number, and for called party is Local directory number.
Does R2 have other requirements for numtypes than R1? Is it some things I have forgot to initiate that is required for R2 and not for R1?
I run BC12 SP3. I do not have the new voiceboards, but use regular TMU.
Best regards
Jeppedal
I have a small problem with Mobil Extension. I have a number of users up and running using R1 for authentication. This works just fine.
Today I initiated a R2 number, but allways get a message stating "unused number" from public network. If I do a trace on SLP60 the calls to the R2 number is disconnected with cause Unasigned (unallocated number).
All incomming traffic to my MD110 is routed in transit through a Nortel Meridian PBX. The numtype for calling party is National Number, and for called party is Local directory number.
Does R2 have other requirements for numtypes than R1? Is it some things I have forgot to initiate that is required for R2 and not for R1?
I run BC12 SP3. I do not have the new voiceboards, but use regular TMU.
Best regards
Jeppedal