Hello all. We have a G700 which is connected to a S8500 via a H.323sip trunk. Over the weekend, there was a power outage at the G700 site which lasted longer than the UPS's unfortunately. When the G700 came back online, all was well except that the MM717's were not showing in the list config. We were able to solve the issue by resetting the associated C-Lan, and they then showed. Has anyone had this issue before, and if so, what was the cause? Thanks In Advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MM717 showing 'no board'
- Thread starter tone70
- Start date
Similar threads
- Question
- Locked
- Question
