MM with MSS Port Config Question... 1

[rm1967]

I have an MM set-up with an MSS / 2 MASs to a Nortel PBX. I have 46 T1-QSIG channels. I would like to set up 5-6 of those channels to be outgoing ports only so the client can run reports for outbound calls. First, how and second, can I do this for both MASs or is 1 MAS okay?

Thanks,

RM

 

[KenMeans]

You can do it on both or just one would be fine. You need to go to the VMSC and change the port groups. You can pick the ports for incoming and outgoing. You will need to restart the MAS service after you make the changes

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)