MM MAS Access via SAL Remote

[wallot]

Folks,

We have a SAL remote server and are able to access our systems very well with the SAL through our SAL remote. The one system or should I say type of access is when using RDP for the MAS. Typically once the secure link is established we use the IP 127.0.0.1. This works for everything except the MAS. I'd asume that would mean any RDP accessable device. I realize this is fairly new and there isn't a great deal of experience with it yet but if you have any ideas, they would be greatly appreciated.

Thanks
Richard

 

[KenMeans]

i do not know SAL but you are trying to connect to the MAS with 127.0.0.1 ?

The IP's should be defined in SAL for each server and you would use that as far as i know.



Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[wallot]

Yes, the actual IPs are in the SAL gateway. But, once you've established a remote session, only 127.0.0.1 will work. I just discovered accessing via RDP is a known issue. Seems we got the ol' pre beta supposed to be GA release.

Thanks Ken

Richard