MM 5.2 sp10 integration with SIP

[knoester]

Hello all,

can anyone tell me where the +(number) is coming from when i connect MM with a Session Manager?
when i connect MM direct with CM sip no problems.
i made an adaptation for + in SM for in and outgoing calls but whitout result.

so in the trace looks like : sip:+3001@ret.rotterdam.nl

thx

 

[betao]

Display aar analysis, is the call type set to AAR? If so, setting the call type to uknu will prevent th "+" from being added to the prefix. Assuming you're using CM 6.0.

 

[knoester]

yes the call-type is aar and with uknu.

 

[texeric]

in the route pattern see if you are set to uknu. if you are try using lev0-pri. Might also try having the FRL to 0 (if not already set to that).

http://www.theviagroup.com