Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MM 5.2 on a S3500

Status
Not open for further replies.

wwmarcww

Technical User
Jul 16, 2004
53
US
Has anyone on here successfully installed MM 5.2 on a S3500 MAS server?

This is MM 5.2 with exchange store.

I am having a heck of a time trying to get it installed. I am on my 6th try so far. The first 3 attempts failed at 99% of the MAS software being installed with a "software failed to install properly" error.

Then on the next 2, it was able to install the software, however, upon a reboot around 75% of the way through the exchange and AD configuration portion, it failed with a "unable to determine installation state" error.

any ideas on how to get this installed?
 
I have done upgrades on S3500 systems that worked. It took hours and hours to do them.

I have also run into what you are seeing and had to start from scratch and reload as a new 5.2

If you are using Set emulation cards you will also run into issues.

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top