hi, i read on cisco's site that the default cos mapping for this receive queue is cos 5 mapped to queue 2, but when i do a show queuing im not seeing that mapping on the receive queue. when i try to map cos 5 to receive queue 2, i only have an option for queue id 1. anyone know what the issue is?
core.frv.ma(config-if)#rcv-queue cos-map ?
<1-1> enter cos-map queue id
Queueing Mode In Rx direction: mode-cos
Receive queues [type = 1p1q0t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 Standard 0
2 Priority 1
queue-limit ratios: 100[queue 1] 0[queue 2]
queue thresh cos-map
---------------------------------------
1 1 0 1 2 3 4 5 6 7
2 1
core.frv.ma(config-if)#rcv-queue cos-map ?
<1-1> enter cos-map queue id
Queueing Mode In Rx direction: mode-cos
Receive queues [type = 1p1q0t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 Standard 0
2 Priority 1
queue-limit ratios: 100[queue 1] 0[queue 2]
queue thresh cos-map
---------------------------------------
1 1 0 1 2 3 4 5 6 7
2 1