Although undocumented, I had a chance to try the older Direct Station Selection module - MLS-CA24 - on my Partner ACS system. It works just fine, providing direct buttons for extensions 10-33. These units are designed to be daisy-chained to provide a total of 48 DSS buttons, but I haven't tried that yet.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MLS-CA24 works on Partner ACS
- Thread starter jlshelton
- Start date
- Status
TouchToneTommy
Vendor
Was not aware that they could be daisy-chained, however the buttons are individually programmable, so you can put whatever extensions you want, in whatever order or grouping you want, and can have them be voice or ring as you desire. Let us know about the daisy-chain!
- Thread starter
- #3
How do you program the buttons?
I cannot find a way in the Remote Admin software.
It may be a while before I get a second unit working; I don't have a second power supply; need to figure out how to modify some other supply to work with this gadget.
=John=
I cannot find a way in the Remote Admin software.
It may be a while before I get a second unit working; I don't have a second power supply; need to figure out how to modify some other supply to work with this gadget.
=John=
TouchToneTommy
Vendor
Can't program DSS buttons from Remote Access software. You need to be at the set, Feature 00, press a DSS button, press Left Hand Intercom button, press * if you want it to be voice announce, dial extension number.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
