I just got a used ML530 with a Smart Array 3200 SCSI controller. Bought a Seagate ST336704LCV that seems to connect to the backplane - the lights cycle that is. But at boot, the controller reports nothing is connected.
Using the SmartStart CD and the array configuration utility, it also reports no drives found.
The drive jumpers are set to the default, ID 0, and I placed the drive in thie only cage in the server, at the A0 slot. Moving it around does not make a difference. I do not think I need to do anything with a terminator.
I am missing 3 drive blanks and they are on order. I would not think the controller needs the blanks to see the drive
Any clues except that I do not know exactly what I am doing?
Using the SmartStart CD and the array configuration utility, it also reports no drives found.
The drive jumpers are set to the default, ID 0, and I placed the drive in thie only cage in the server, at the A0 slot. Moving it around does not make a difference. I do not think I need to do anything with a terminator.
I am missing 3 drive blanks and they are on order. I would not think the controller needs the blanks to see the drive
Any clues except that I do not know exactly what I am doing?